spdif input
AnsweredI want to output audio from my Hitachi tv monitor to the spdif input on the komplete audio 6. Reason being is the Google TV box only has hdmi and optical outputs. Is there a way to make this work?
-
Offizieller Kommentar
Hello Warren,
If you want to use the spdif inputs/outputs on the komplete audio 6, you have to use a spdif signal. Other types of signals will not be recognized.
Best,
Larry
Aktionen für Kommentare -
hi guys ,
I've recently bought a Komplete 6 audio interface. I needed a USB Win10 compatible interface, with MIDI I/O and SPIF I/O_ the latter in order to connect my Rotel CD Player.
Turns out, it doesn't work.
I've got a MetricHalo 2882 audio interface, and it has had the same CD deck player plugged IN for over 10years, without any problems.
Is the internal Clock on the Komplete 6 not working?
What can i do ?Thanks very much
cheers
K_Dua
-
Hi K_Dua,
Please check this info from our knowledge base to solve the issue.
Also, please try with various sample rates & bit depths. Last but not least the test on another computer would be useful!
-
Hello Marcel,
Thanks very much for the reply,
I had already tried the setup on my Win 10 desktop, an old Win 8 laptop and my Macbook Pro.. so.. it is not the computers. As i said also.. it is not the CD player either, because it works fine, with the Metric Halo 2882 interface.
Trying anything than not 16bit depth @ 44.1kHz would probably be even worse because the CD player will read the CD at those rates. Normally the KA6 should detect the signal and lock the internal clock.
That's why i think it is the internal clock on the Komplete 6.
Since it is brand new.. and it's got an updated driver.. it's proving to be a bump..
On the Win 10 i can't even get a signal from the spdif source.. because i see that the red LED on the KA6 wont even light up.
However, on the Mac, the SPDIF Sync 5/6 LED lights up. The OUTPUT 1/2 doesn't though.. and it should as the CD's playing on the Rotel deck.
Can you supply me with any further info ?
What is the procedure here ?
I need this to work or else i'll have to get a different interface.
I bought this from Thomann.de but the 30day trial is over .
I actually like the interface.. so i would like you guys to help me solve this.
I'll wait your reply,thanks again
cheers
Duarte P. -
Hi Duarte,
Could you please send me screenshots of your Komplete Audio 6's digital sync settings?
Normally when feeding in a signal it should the set to external as explained on p. 29 of the Komplete Audio 6 Manual English.
For instructions on creating a screenshot, please check one of these links:
Mac (sync settings in Audio MIDI Setup application)
PCCheers,
Marcel
-
Hi Marcel,
Thanks for the previous feedback, you gave me.
I have been busy.. so .. i was only able to respond today..
I send you a couple of screenshots with the way i have this KA 6 configured, on my Macbook Pro.From an internal audio source standpoint there's no problem.
I've used both VLC and QuickTime players with no relevant issues .
The same for Logic Pro and Final Cut.As for the Ext Synch.. the problem persists.
It might be something on my part.. but it doesn't seem like it.On Mac , as i mentioned previously.. the SPDIF SYNCH red LED actually does light up.
As soon as i switch it to that setting, the input display on the MAC's audio settings pane starts to Clip .. and keeps oscillating between near-clipping and clipping levels.. And that occurs irrespective of the CD player being on playback or just stopped.
When i turn the CD Player off the display shows 90%-like indicators and no clipping.. .. so.. i might assume the problem starts there.The sample rate format is random too. I have had it locking on 44.1kHz .. and 48kHz...
(quick side note : I have had some glitches on the past, on the 2882 interface, while using the Rotel CD Player.. when i was near other EM fields.. that interfere with the lack of Ground on the Rotel's power supply .
Having said that.. its completely unlikely to being part of the problem..)
Any further info that you might be able to supply me, will be very welcome.. as if i/we are unable to fix this...i will have to return the unit.
Hope we find the solution.i'll wait your feedback
thanks
cheers
Duarte
PS: 3rd screenshot shows settings on internal source.
1st and 2nd show it on ext Synch settings with the oscillating&clipping on the input source on the mac audio settings. -
Hi again, Marcel
Well.. i just tried feeding the signal into Logic and.. it's more of the same.. as i expected.
The only thing to notice is that, with Logic's Interface one gets a better visual feedback of the 5&6 channel's clipping, as soon as i turn on the CD Player.
Any further suggestions ?thanks
Post ist für Kommentare geschlossen.
Kommentare
11 Kommentare