With the MASCHINE+ USB ports on the back of the device, it is possible to connect a wide variety of class-compliant MIDI and audio devices. This includes the entire range of KOMPLETE AUDIO interfaces, the KOMPLETE KONTROL M32, and other third-party devices.
In theory, so long as the device is class-compliant, it should be detected by MASCHINE+ and function immediately.
Below are lists of Native Instruments and third-party devices that have been tested and are known to function with MASCHINE+ via USB. These lists may be updated as we test more devices and are able to confirm their compatibility.
Note: The devices marked with an asterisk (*) indicate that they have been tested by other users who have confirmed their compatibility with MASCHINE+.
NI Audio Interfaces
- KOMPLETE AUDIO 6 MK1
- TRAKTOR AUDIO 2 MK2
- TRAKTOR AUDIO 6
- TRAKTOR AUDIO 10
- KOMPLETE AUDIO 1
- KOMPLETE AUDIO 2
- KOMPLETE AUDIO 6 MK2
NI MIDI Devices
Note: the devices marked by (†) symbol will only work in MIDI mode when connected to MASCHINE+.
- KOMPLETE KONTROL M32
- KOMPLETE KONTROL S-Series MK1†
- KOMPLETE KONTROL S-Series MK2
- KOMPLETE KONTROL A-Series
- MASCHINE JAM†
Third-Party Audio Interfaces
Note: the performance and availability of some features may vary depending on the interface.
|Behringer||U-Phoria UMC404 HD|
|Elektron||Analog Heat MK1/MK2*|
|Line 6||SonicPort VX*|
|Focusrite||Scarlet 2i2 (Gen 1)|
Third-Party MIDI Devices
Note: the performance and availability of some features may vary depending on the MIDI device.
External USB Drives
External USB drives can be used with your MASCHINE+ and can be browsed through via your device.
Note: The MASCHINE+ supports standard USB2 hard drives, powered by 2.5W, 5V @ 500mA. If you are experiencing problems with your device, please check the specifications of your external hard drive. It is possible the hard drive needs more than 2.5Watts to be powered.
This article was last updated on March 1, 2021.